LUSSA BMW E9X M3 Forged Wheels - 18×11 Square

BMW E9X M3 Monoblock Forged Motorsport Wheels

Engineered for the E9X M3. Built for the Track.

Designed specifically for drivers pushing the BMW E90, E92, and E93 M3 beyond street-car limits, this monoblock forged motorsport wheel delivers the strength, safety margin, and low weight required for serious track use.

Aggressive E9X M3 Fitment — Fender & Pinch-Weld Modification Required

This is a dedicated track-focused fitment, not a bolt-on street setup. To provide adequate tire clearance under compression and steering load, fender modifications are required.

Installation may require Fender rolling, pulling, or trimming

-Flattening/reshaping the inner fender pinch weld to prevent tire contact

-Alignment adjustments, including appropriate negative camber

-Fitment verification based on tire size, ride height, suspension, and driving use

These modifications are essential to prevent rubbing during hard cornering, suspension compression, and track use.

True Monoblock Forged Construction

Machined from a single forged billet, each wheel is engineered without the structural compromises of multi-piece or cast designs. The result is exceptional rigidity, durability, and confidence under extreme braking and cornering loads.

-1,985 lb load rating

-1.725 FEA safety factor on every wheel

-Designed for sustained high-speed cornering, heavy braking, and track abuse

Lightweight. Race-Ready.

An 18x11 wheel weighs approximately 19 lb—delivering the strength demanded by the E9X M3 platform without unnecessary mass.

-Reduced unsprung weight

-Sharper steering response and turn-in

-Improved acceleration and braking

-Better suspension control over curbing and uneven track surfaces

Motorsport-Driven Finishes

Available exclusively in Raw Sandblasted or Plasma Electrolytic Oxidation (PEO).

No paint. No powder coat. No unnecessary weight.

Conventional coatings can discolor, peel, and degrade under repeated high brake temperatures and aggressive brake dust. These finishes are selected for a performance-first E9X M3 track build.

Raw Sandblasted Finish

-Minimal weight

-Withstands repeated heat cycles

-Easy to inspect after hard track use

-Built for drivers who value function over cosmetic excess

Plasma Electrolytic Oxidation (PEO) Finish

PEO is a transparent ceramic surface treatment that replaces conventional multi-layer paint systems with an approximately 20 μm protective layer.

-Withstands temperatures up to 1000°C

-Low brake-dust adhesion for easier cleaning

-Light-gold transparent finish keeps the forged surface visible

-Makes impact marks and track damage easier to identify during inspection

Made to Order

Every set is built specifically for your E9X M3 application.

Lead Time: 6–10 Weeks

Precision forged. Built to order. No shortcuts and no compromise.

Custom Finish Options

Raw Sandblasted and PEO are our recommended motorsport finishes, but special-color finish options may also be available upon request.

Contact us to discuss custom colors, finish options, and availability